5^th OpenFOAM Workshop

www.openfoamworkshop.org

Photo: CFFC, Chalmers Film och Foto Committé

Chalmers University of Technology

Gothenburg, Sweden

21-24 June 2010

Organization

The organization of the Fifth OpenFOAM[1] Workshop[2] follows in the footsteps of the first four successful OpenFOAM Workshops. The OpenFOAM Workshop Committee was formed in September 2008 to discuss the development and the evolution of these events. The current members of the committee are:

Håkan Nilsson, Chalmers University of Technology, Sweden

Maryse Page, Hydro-Quebec, Canada

Martin Beaudoin, Hydro-Quebec, Canada

Andrew Jackson, Engys, Great Britain

Gavin Tabor, The University of Exeter, Great Britain

Bernhard Gschaider, ICE Strömungsforschung GmbH, Austria

Zeljko Tukovic, University of Zagreb, Croatia

Hrvoje Jasak, Wikki Ltd, Great Britain

Gianluca Montenegro, Politecnico di Milano, Italy

Alojz Ivankovic, University College Dublin, Ireland

Eric Paterson, The Pennsylvania State University, USA

Francois Guibault, Ecole Polytechnique de Montreal, Canada

Henrik Rusche, Wikki GmbH, Germany

Kati Laakkonen, ICON, Great Britain

The following people were also involved in the preparation of the Workshop:

Tommaso Lucchini, Politecnico di Milano, Italy

Oliver Borm, Technische Universität, Germany

The Fifth OpenFOAM Workshop is hosted by Chalmers University of Technology, Gothenburg, Sweden. The members of the Swedish local committee are:

Håkan Nilsson, Chalmers, Sweden

Olivier Petit, Chalmers, Sweden

Pirooz Moradnia, Chalmers, Sweden

The OpenFOAM Workshop committee can be reached at committee@openfoamworkshop.org

The local committee can be reached at ofw5@openfoamworkshop.org

Monday 21^st June

08.00-09.00	Training / Workshop registration
09.00-10.30	Basic Training	Advanced training
10.30-10.50	Coffee Break
10.50-12.30	Basic Training	Advanced training
12.30-13.30	Lunch Break
13.30-15.00	Basic Training	Advanced Training
15.00-15.20	Coffee Break
15.20-17.00	Basic Training	Advanced Training

Tuesday 22^nd June

08.00-09.00	Workshop Registration
09.00-09.15	Welcome Talk L. Davidson, H. Nilsson (Chalmers University of Technology)
09.15-10.00	Feature Talk: ”A Year in Review” H. Jasak (Wikki Ltd)
10.00-10.20	Poster session Chairman Room:
	”Bubble dynamics inside a compliant blood vessel” W. Wiedemair, V. Kurtcuoglu, D. Poulikakos (Laboratory of Thermodynamics in Emerging Technologies) ABSTRACT
	”Numerical study of free convection to an array of inline cold horizontal cylinders above an adiabatic floor” M. Sedaghat, A. Sarreshtehdari, M.J. Mahgrebi (Shahrood University of Technology), M. Yaghoubi (Shiraz University) ABSTRACT
	“Space-time window reconstruction inside finite volume simulations” A. Alin-Adrian, C. Vladimir-Ioan (Politehnica University of Timisoara) ABSTRACT
	“Multi scale porous medium model for brain mechanisms” B. Siyahhan, V. Kurtcuoglu, D. Poulikakos (Laboratory of Thermodynamics in Emerging Technologies) ABSTRACT
	“Evaluation of the cavitatingFoam solver for low Mach Number Flows around 2D Hydrofoils” A. Gosset, V. Díaz Cásas, F. López Peña (Universidade da Coruña) ABSTRACT
	“Computation of high lift aerodynamics for multi elements aerofoil at landing and subsonic flights conditions using OpenFOAM” K.M. Naveen, V.Y. Mudkavi (National Aerospace Laboratories) ABSTRACT
	“OpenFOAM and Tecplot Post-Processing” Jens Warkall (Genias Graphics GmbH & Co. KG) ABSTRACT
	“Comparison of Numerical and Experimental Results of the Flow in the Porjus U9 Kaplan Turbine Model” O. Petit, H. Nilsson (Chalmers University of Technology) ABSTRACT
	“Four Studies with Moving Meshes in OpenFOAM” H. Nilsson, S. Xie, O. Bergman, A.O. Gonzalez, M. Vanama, M. Jönsson, O. Petit, L. Davidson, M. Svensson, K. Holmqvist (Chalmers University of Technology), E. Lindén, J. Spång (Husqvarna AB) ABSTRACT
10.20-10.50	Coffee break
10.50-12.30	Heat and Mass transfer Chairman: Room:	Turbomachinery, part A Chairman: Room:
10.50-11.10	“CFD analysis of the salt flow in a tube heat exchanger” W. Hageraats, H. Bos (Dynaflow Research Group) ABSTRACT	“Hydraulic turbine distributor simulation using OpenFOAM” F. Guibault, C. Devals, J.F. Dubé, (École Polytechnique de Montréal), T. Vu, B. Nennemann (ANDRITZ HYDRO) ABSTRACT
11.10-11.30	“Validation of OpenSource CFD methods used for automotive defrost simulations” R. Bouwman, T. Völker (Icon Technology) ABSTRACT	“Simulations of Characteristics for a reversible pump-turbine” G. Olimstad, T. Nielsen (Norges Naturevitenskapelge og Tekniske), B. Børresen (EnergiAkademiet) ABSTRACT
11.30-11.50	“Numerical simulation of species transfer at Gas-liquid interfaces using OpenFOAM” H. Marschall, O. Hinrichsen, C. Schüler, K. Hinterberger (Technische Universität München) ABSTRACT	“Transient flow simulations and performance analysis of a single channel pump” M. Auvinen, J. Ala-Juusela (Aalto University), N. Pedersen (Grundfos A/S) ABSTRACT
11.50-12.10	“An OpenFOAM implementation of Ice Accretion for Rotorcraft” M. Kinzel, R. W.Noack, C. M. Sarofeen, D. A. Boger, S. T.Miller (The Pennsylvania State University) ABSTRACT	“Adapting OpenFOAM for hydro turbines” M. Page, M. Beaudoin (Hydro-Québec, Institut de recherche) ABSTRACT
12.10-12.30	“On sliding air bubbles and their interaction with natural convection flow” Y. Delauré, A. Albadawi (Dublin City University) ABSTRACT	“Unsteady flow computations of a pump turbine” M. Buchmayr, A. Gehrer (ASTROE GmbH), F. Champet, E. Parkinson (ANDRITZ HYDRO) ABSTRACT
12.30-13.30	Lunch Break
13.30-15.30	Automotive and Combustion, part A Chairman: Room:	Multiphase Flow, part A Chairman: Room:
13.30-13.50	“Application of the tabulation of dynamic adaptive chemistry method for CFD simulations including detailed oxidation mechanisms” F. Contino, H. Jeanmart (Université catholique de Louvain), T. Lucchini, G. d’Errico (politecnico di Milano) ABSTRACT	“An Open Source CFD-DEM Perspective” C. Goniva, C. Kloss, A. Hager, S. Pirker (C.D Laboratory on Particulate Flow Modeling) ABSTRACT
13.50-14.10	“Non adiabatic steady laminar flamelet model in OpenFOAM” A. Cuoci, E. Leoni, A. Frassoldati, T. Faravelli, E. Ranzi (Politecnico di Milano) ABSTRACT	“Simulation of bubble-particle interaction using OpenFOAM” G. Wierink, K. Heiskanen (Aalto University School of Science and Technology), Z. Tuković (University of Zagreb) ABSTRACT
14.10-14.30	“Soot formation in turbulent, non premixed flames using OpenFOAM” A. Cuoci, D. Patriarca, A. Frassoldati, T. Faravelli, E. Ranzi (Politecnico di Milano) ABSTRACT	“Liquid coverage of rotating disks” B. Gschaider (ICE Strömungsforschung GmbH), P. Vita (Department Mineral Ressources and Petroleum), D. Prieling, H. Steiner (Institute of Fluid Mechanics and Heat Transfer) ABSTRACT
14.30-14.50	“A comprehensive implementation of the Eddy dissipation model for turbulent combustion simulation” B. Lilleberg, I. S. Ertesvåg (Norwegian University of Science and Technology), D. Christ, D. Toporov, R. Kneer (Rheinisch Westfälische Technische Hochschule), K.E. Rian (ComputIT) ABSTRACT	“Two phase flow analysis of a finger-type slug catcher” F. Bos, H. Bos (Dynaflow Research Group) ABSTRACT
14.50-15.10	“Numerical simulation of coal gasification in entrained flow gasifiers with coalFoam” D. Messig, K. Uebel, M. Gräbner, B. Meyer (TU Bergakademie Freiberg) ABSTRACT	“Modeling the effects of small particles on near wall shear stress” A. Sarreshtehdari, M. Sedaghat (Shahrood University of Technology), M. Zeinali ( Iran University of Science and Technology) ABSTRACT
15.10-15.30	“Turbulent premixed flame model based on a recent dispersion model” F. Ghirelli ABSTRACT	“Development of a steady state critical 2 phase flow in a nozzle” S. Martel, Y. Mercadier (University of Sherbrooke), M. Dostie (Energy Technology Laboratory, Hydro-Québec) ABSTRACT
15.30-16.00	Coffee Break
16.00-18.20	Ventilation and atmospheric flow Chairman: Room:	Ship Hydrodynamics and Cavitation Chairman: Room:
16.00-16.20	“Climate control and HVAC simulation for occupied spaces” E. de Villiers, A. P. Jackson (Engys Ltd), T. Schumacher (Engys UG), T. Tian (Beuth Hochschule für Technik Berlin) ABSTRACT	“Dynamic overset Grid implementation in OpenFOAM” D. Boger, R. W. Noack, E. G. Paterson (The Pennsylvania State University) ABSTRACT
16.20-16.40	“Using OpenFOAM for ventilation design” J. Croll, B. Hoepperger (ILF Beratende Ingenieure ZT GmbH) ABSTRACT	“Development of hybrid RANS-LES methods for flow simulations in ship stern area using OpenFOAM” N. Kornev, A. Taranov, E. Shchukin, L. Kleinsorge (University of Rostock) ABSTRACT
16.40-17.00	“Numerical simulation of mixed convection in an aircraft cabin segment” O. Webel, M. Rütten, C. Wagner (German Aerospace Center) ABSTRACT	“A generic wave generation and wave relaxation framework” N.G. Jacobsen (Technical University of Denmark) ABSTRACT
17.00-17.20	“Numerical simulation of the oscillatory ventilation in a simplified human lung model using OpenFOAM” D. Feldmann, C. Wagner (German Aerospace Center) ABSTRACT	“Fluid structure interaction during ship slamming” K. Maki, D. J. Piro, D. Lee (University of Michigan) ABSTRACT
17.20-17.40	“CFD simulation of flow over a mock urban setting” A. Rakai, G. Kristóf (Budapest University of Technology and Economics) ABSTRACT	“Assessing cavitation nuisance using LES in OpenFOAM” R. Bensow, G. Bark (Chalmers University of Technology) ABSTRACT
17.40-18.00	“OpenFOAM simulations of atmospheric flow over complex terrain” J. Sumner, C. Masson (École de technologie supérieure), Y. Odemark (Vattenfall Research and Development AB), M. Cehlin (University of Gävle) ABSTRACT	“Cavitation models; performance and limitations” R. Bannari, P. Proulx (Université de Sherbrooke), S. Cupillard, A.M. Giroux, M. Page (Hydro-Québec, Institut de recherche) ABSTRACT
18.00-18.20	“Evaluation of OpenFOAM with a German VDI guideline 3783/9 for environmental meteorology” M. Sturm, J. Franke (University of Siegen) ABSTRACT	“LPT with random walk model and interPhaseChangeFoam with nonhomogeneous nuclei distribution” A.Vallier, J. Revstedt (Lund University of Technology), H. Nilsson (Chalmers University of Technology) ABSTRACT
18.30-20.00	Cocktail reception

Wednesday 23^nd June

09.00-10.20	New Implementations in OpenFOAM Chairman: Room:
09.00-09.20	“Lib-ICE: A C++ object-oriented library for ICE simulations” F. Piscaglia, A. Montorfano, A. Onorati (Poltecnico di Milano) ABSTRACT
09.20-09.40	“A coupled finite volume solver for the solution of laminar and turbulent incompressible flow” L. Mangani (HSLU T&A), C. Bianchini (University of Florence) ABSTRACT
09.40-10.00	“Implicit solution techniques for a coupled multi-field problems” H. Rusche (Wikki GmbH), H. Jasak (Wikki Ltd) ABSTRACT
10.00-10.20	“A coupled pressure based solution algorithm based on the VOF approach for two or more immiscible fluids” J. Springer (University of Ulm), K. Kissling, S. Schütz, M. Piesche (University of Stuttgart), H. Jasak (Wikki Ltd) ABSTRACT
10.20-10.50	Coffee Break
10.50-12.30	Turbomachinery, part B Chairman: Room:	Multi Physics Chairman: Room:
10.50-11.10	“Conjugate heat transfer analysis of NASA C3X film cooled vane” L. Mangani (Lucerne University), M. Maritano, (Ansaldo Energia), M. Cerutti (CFD engnineering) ABSTRACT	“Simulation of magneto hydrodynamic flows by using an electric potential formulation” C. Mistrangelo (Karlsruhe Institute of Technology), O. Widlund (ABB AB, Corporate Research) ABSTRACT
11.10-11.30	“Implementation of a domain scaling approach for turbomachinery computations in OpenFOAM” O. Borm, F. Tekin, H.P. Kau (Technische Universität München) ABSTRACT	"Numerical modeling of a thermal plasma flow in electric arc welding using OpenFOAM" I. Choquet (University West, Trollhättan), H. Nilsson (Chalmers University of Technology) ABSTRACT
11.30-11.50	“Studies of the ERCOFTAC Centrifugal Pump” S. Xie, O. Petit, H. Nilsson (Chalmers Univesity of Technology) ABSTRACT	“A pyrolis and ablation toolbox based on OpenFOAM” J. Lacchaud, N. M. Mansour (NASA Ames Research Center) ABSTRACT
11.50-12.10	“Studies of The Timisoara swirling flow test rig” O. Bergman, O. Petit, H. Nilsson (Chalmers University of Technology) ABSTRACT	“Charge transport in high voltage DC insulation systems” T. Laneryd, O. Widlund, J. Schiessling (ABB Corporate Research) ABSTRACT
12.10-12.30	“Air Flow in Hydro Power Generators for Convective Cooling” P. Moradnia, H. Nilsson (Chalmers University of Technology) ABSTRACT	“Development of an OpenFOAM CFD model of the electromagnetically stirred steel flow in the mould of a billet caster” E. van Vliet, D. van der Plas (Corus Research Development & Technology), SK. Ajmani (Tata Steel Research Development & Technology) ABSTRACT
12.30-13.30	Lunch Break

13.30-15.30	Automotive and Combustion, part B Chairman: Room	Optimization, HPC and Mesh Generation Chairman: Room:
13.30-13.50	“Finite rate chemistry effects and combustor liner heat transfer studies in a framework of LES of turbulent flames” K.J. Nogenmyr, C.K.Chan (The Hong Kong Polytechnic University), C. Duwig (Lund University of Technology) ABSTRACT	“Benchmarking hardware with OpenFOAM, a possible reference case” J. Klostermann, R. Schwarze, C. Brücker (TU Bergakademie Freiberg) ABSTRACT
13.50-14.10	“Simulation of evaporation and combustion of droplets using VOF methods” P. Keller, P.A. Nikrityuk, B. Meyer (TU Bergakademie Freiberg) ABSTRACT	“Parallel CFD of a prototype car with OpenFOAM” L. Gagnon, M. J. Richard, G. Doré (Laval University) ABSTRACT
14.10-14.30	“Modeling of gasoline hollow cone spray using OpenFOAM” C. Huang (Chalmers University of Technology) ABSTRACT	“Shape optimization of valve channel with incompressible to compressible simulation for pressure Loss calculation” S. Kubo (IHI Corporation) ABSTRACT
14.30-14.50	“Lib-ICE: A C++ object-oriented library for internal combustion engine simulations - spray and combustion modeling” T. Lucchini, G. d’Errico, D. Ettore, E. Spagnoli, G. Ferrari (Politecnico di Milano) ABSTRACT	“enGrid: OpenSource mesh generation and GUI” O. Gloth (enGits) ABSTRACT
14.50-15.10	“Using OpenFOAM to model of complex industrial devices” C. Duwig (Haldor Tospøe A/S), H. Hassing, E. Akoh Hove (Force Technology) ABSTRACT	“CAD geometry based pre-processing for CFD using abstract modeling techniques” U. Heck (DHCAE-Tools UG) ABSTRACT
15.10-15.30	“Thin liquid film modeling in OpenFOAM, application to fire suppression” K. Meredith (FM Global) ABSTRACT	“Automatic shape optimization in hydraulic machinery using OpenFOAM” J. Simader, A, Ruopp, R. Eisinger, A. Ruprecht (University of Stuttgart) ABSTRACT
15.30-16.00	Coffee Break
16.00-18.00	Turbulence Modeling Chairman: Room	Multiphase Flow, part B Chairman: Room:
16.00-16.20	“Numerical investigation of the swirling flow and the vortex control in a straight diffuser” I. Buntic-Ogor, T. Krappel, O. Kirschner, A. Ruprecht (Univesity of Stuttgart) ABSTRACT	“Numerical simulation with particle transport to compute self and third party soiling of motor vehicles” A. Dietz, T. Indiger (FluiDyna GmbH) ABSTRACT
16.20-16.40	“LES of the flow around an oscillating cylinder” A. Feymark, R. Bensow (Chalmers University of Technology), N. Alin, C. Fureby (Defense & Security, Systems and Technology) ABSTRACT	“Gear system lubrication with OpenFOAM” D. Speziani, A. Pasquali (Phitec Ingegneia Srl) ABSTRACT
16.40-17.00	“LES of turbulent flow on dimpled surface and genetic optimization of heat transfer surfaces” J. Turnow, N. Kornev, E. Hassel (University of Rostock) ABSTRACT	“Numerical investigation of the deformation and break-up mechanisms of droplets in high-pressure emulsification orifice with a coupled Volume-of-Fluid/Level-Set Method” K. Kissling, S. Schütz, M. Piesche (University of Stuttgart) ABSTRACT
17.00-17.20	“Investigation of turbulent reacting mixing processes at Schmidt numbers in a coaxial jet mixer using OpenFOAM” M. Walter, N. Kornev, Z. Zhdanov, E. Hassel (University of Rostock) ABSTRACT	“Modeling Lagrangian sub-micro particles flow and deposition using LES” M. Forman, J. Volavý, M. Jícha (Brno University of Technology) ABSTRACT
17.20-17.40	“LES of flows, flames and acoustic waves in gas turbines and aero engines” P. Iudiciani, C. Duwig, R. Z. Szasz, H. Grosshans, L. Fuchs, M. Åberg (Lund University of Technology) ABSTRACT	“Modeling fast reactions and particle flow” S. Radl, J. G. Khinast, M. C. Gruber (Graz University of Technology), D. Suzzi, A. Eitzlmayr (Research Center Pharmaceutical Engineering) ABSTRACT
17.40-18.00	“Validation and enhancement of DES in OpenFOAM” U. Bunge, S. Degner (Semcon Wolfsburg), C. Mockett, F. Thiele (CFD Software) ABSTRACT	“CFD analysis of dilute sprays using the Euler-Lagrange modeling” A. Holm-Nielsen, V. Sreedharan, T. Solberg (Aalborg University), B. H. Hjertager (University of Stavanger) ABSTRACT
19.00	Dinner Banquet

Thursday 24^th June

09.00-10.00	Feature Talk: ”New functionalities at OpenFOAM-Extend, and community activities” M. Beaudoin (Hydro-Québec), O. Borm (Institute for Flight Propulsion), B. Gschaider (ICE Strömungsforschung GmbH), H. Jasak (Wikki Ltd), H. Marschall (Technische Universität München), H. Nilsson (Chalmers University of Technology), H. Rusche (Wikki GmbH) ABSTRACT
10.00-12.30	Working Group
12.30-13.30	Lunch Break
13.30-15.30	Working Group
15.30-16.30	BOF
16.30-17.00	Concluding Session

---

[1] OPENFOAM® is a registered trademark of OpenCFD Ltd.

[2] This event is not affiliated with OpenCFD Ltd.